Your Position: Home > Electronics > Router > DrayTek VigorSwitch G1240 Network Switch

View History

DrayTek VigorSwitch G1240 Network Switch

prev next

  • NO.:000378
  • Brand:DrayTek
    Package Weight:3.500kilogram
  • Orig.:US$652.48
    Registered users:US$434.99
    Rank: comment rank 5
  • Total:
  • Quantity:
    Limit points for buying:400 integral
  • forward to friends

Items Brief:

Attribute

DrayTek VigorSwitch G1240 Network Switch

- 4 Dual Media ports for flexible fiber connection
- QoS with four-level priority queues
- Port Mirroring for monitoring network without breaking down data flow
- 802.1x Access Control for improving network security
- Port trunk for balancing traffic load
- Auto detect client idle or cable length for Power saving
- 802.1d compatible and 802.1w Rapid Spanning Tree

The DrayTek VigorSwitch G1240 is a cost-effective web smart switch that meets all IEEE 802.3/u/ab/z Gigabit, Fast Ethernet specifications. It is equipped with 20 10/100/1000Base-T ports and 4 dual media ports that accommodate optional 10/100/1000Base-T or SFP modules. The switch can be managed through Ethernet port using Web browser, the network administrator can logon the switch to monitor, configure and control each port’s activity. In addition, the switch implements the QoS, Port Mirror, VLAN, LACP, LAN security, Multicasting video stream protocol, and SNMP. It is suitable for SMB application.

QoS (Quality of Service)
With DrayTek VigorSwitch G1240, the QoS feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay-sensitive traffic. The switch classifies the packet as one of the four priorities according to 802.1p priority tag, DiffServ and/or IP TOS. The QoS operates at full wire speed. 

Port Mirroring
Port Mirroring mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data, allowing ingress traffic (RX mode) to be monitored by a single port that is defined as mirror capture port. The mirror capture port can be any 10/100 port, 10/100/1000 port. 

Network Security
802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

Bandwidth Aggregation
The Gigabit ports can be combined together to create a multi-link load-sharing trunk. Up to 12 Gigabit ports can be set up per trunk. The switch supports up to 12 trunking groups. Port trunks are useful for switch-to-switch cascading, providing very high full-duplex speeds. 

Flexible fiber connection
Four dual media ports are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections. 

Power Saving
The Power saving using Power Management techniques to detect the client idle and cable length automatically and provides the different power. It could efficient to save the switch power and reduce the power consumption.

Technical Specification
Standard Compliance
IEEE 802.3x Flow Control Capability
IEEE 802.1q VLAN
IEEE 802.1p QoS 
IEEE 802.1w Rapid Spanning Tree 
IEEE 802.3ad Port Trunk with LACP

Performance
Switching capacity
48Gbps Forwarding Bandwidth for Switch, Non-blocking Switch Fabric Wire Speed Performance
8 K MAC Addresses 
500KB On-chip Frame Buffer
Jumbo Frame Support to 9600 bytes
Unknown Unicast / Multicast / Broadcast / Storm Suppression
Port Mirroring

VLAN
Port-base VLAN
IEEE802.1q Tag-base VLAN, 4094 Max, up to 24 Active VLANs
In tag-base VLAN, Supports Egress / Ingress Packet Filter

QoS
Supports Port based, Tag based, IPv4 ToS and DSCP
Supports 802.1p QoS with Four-level Priority Queue
Supports Two Scheduling, WRR and Strict

Bandwidth Control
Supports Bandwidth Rating per Port Ingress and Egress Rate Limit 1000Mbps with 1Mbps Increment

Protocol
LACP/Port Trunk
Port Trunking with 12 Trunking Groups
Up to 12 Ports for Each Group

Multicasting 
Supports IGMP Snooping

Network Security
Supports 802.1x Access Control for Multi-host Authentication for Port based
Supports MAC based Authentication with Radius Server

SNMPv1, v2c Network Management
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2863 Interface Group MIB

Interface
24 x 10/100/1000Mbps Ports, RJ-45
4 x SFP Dual-media Ports (Shared with 4 Gigabit Ports)
1 x Reset Button


Technical Specifications of VigorSwitch G1240
Interface 24 x 10/100/1000Mbps Ports, RJ-45
4 x SFP Dual-media Ports (Shared with 4 Gigabit Ports)
1 x Reset Button
Standard Compliance IEEE 802.3x Flow Control Capability
IEEE 802.1q VLAN
IEEE 802.1p QoS
IEEE 802.1w Rapid Spanning Tree
IEEE 802.3ad Port Trunk with LACP
Performance Switching Capacity 48Gbps Forwarding Bandwidth for Switch, Non-blocking Switch Fabric Wire Speed Performance
8 K MAC Addresses
500KB On-chip Frame Buffer
Jumbo Frame Support to 9600 bytes
Unknown Unicast / Multicast / Broadcast / Storm Suppression
Port Mirroring
VLAN Port-base VLAN
IEEE802.1q Tag-base VLAN, 4094 Max, up to 24 Active VLANs
In tag-base VLAN, Supports Egress / Ingress Packet Filter
QoS Supports Port based, Tag based, IPv4 ToS and DSCP
Supports 802.1p QoS with Four-level Priority Queue
Supports Two Scheduling, WRR and Strict
Bandwidth Control Supports Bandwidth Rating per Port Ingress and Egress Rate Limit 1000Mbps with 1Mbps Increment
Protocol LACP/Port Trunk Port Trunking with 12 Trunking Groups
Up to 12 Ports for Each Group
Multicasting Supports IGMP Snooping
Network Security Supports 802.1x Access Control for Multi-host Authentication for Port based
Supports MAC based Authentication with Radius Server
SNMPv1, v2C Network Management RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2863 Interface Group MIB
Power 100~240 VAC, 50~60 Hz
Operating Temperature 0 to 40 °C
Humidity 10 to 90% RH (non-condensing)
Dimensions 44(H) x 442(W) x 170(D) mm
Weight 2.4 kg